International Science Community Association Research Journal of Engineering Sciences 2278-9472 9 3 2020 09 26 Approach of green and lean manufacturing study of the small industries in Bangladesh 19 22 EN Semassou Guy Clarence 1 Laboratory of Energetics and Applied Mechanics (LEMA), University of Abomey-Calavi, 01 BP 2009 Cotonou, Benin Chegnimonhan Kouamy Victorin 2 Thermics and Energy Laboratory of Nantes, (LTEN) - CNRS, UMR 6607, BP 50609, 44306 Nantes, France Ahouansou Roger 3 Laboratory of Energetics and Applied Mechanics (LEMA), University of Abomey-Calavi, 01 BP 2009 Cotonou, Benin Tonoukouin Romualde P. 4 Laboratory of Energetics and Applied Mechanics (LEMA), University of Abomey-Calavi, 01 BP 2009 Cotonou, Benin Houndekpondji Germain 5 Laboratory of Energetics and Applied Mechanics (LEMA), University of Abomey-Calavi, 01 BP 2009 Cotonou, Benin Kumar Umesh 1 Mechanical Engg. Department, Bhilai Institute of Technology, Durg-491001, CG, India Pal M.K. 2 Mechanical Engg. Department, Bhilai Institute of Technology, Durg-491001, CG, India Sushil Sanatan 1 Industrial and Production Engineering Department, Shahjalal University of Science and Technology, Sylhet, Bangladesh Islam Md. Shafikul 2 Industrial and Production Engineering Department, Shahjalal University of Science and Technology, Sylhet, Bangladesh Islam Tanjidul 3 Industrial and Production Engineering Department, Shahjalal University of Science and Technology, Sylhet, Bangladesh Khan Md. Sagar Islam 4 Industrial and Production Engineering Department, Shahjalal University of Science and Technology, Sylhet, Bangladesh > Research Article 2020 5 13 2020 09 26 The economic outgrowth rate of Bangladesh is on the rise drastically, day by day. Productivity is the main engine, and modernism is the fuel for operating and expanding this market. To boost up the productivity and quality of product lean methodology is one of the paramount methods. Lean and green manufacturing can simultaneously be used to enhance operational efficiency and mitigate waste and emissions. Moreover, Green manufacturing integrated with lean can ensure the lowest environmental effect, it also helps the sustainable development of modern manufacturing companies. The main aim of this research is to implement the Eco Value Stream Mapping approach in a smaller context in 5 industries and try to assess incremental progress. Finally, some obstacles are also found in the implementation of green-lean technology, for those problems several salient suggestions are suggested. Copyright@ International Science Community Association